Buy 30 kva Three Phase Transformer
Buy 30 kva Three Phase Transformer
30 kVA isolation transformer is a three phase isolation transformer with optional primary and secondary voltages, 480 Volt to 400 Volt, 416 Volt to 208Y/120 Volt, enameled copper or aluminum wire and delta connection and star connection, 50Hz/60Hz frequency, working efficiency up to 98%. Cost-effective 1 to 1 isolation transformer is frequently used for medical device, robot device, etc.
- Model : PEACO-SG-30KVA
- Capacity* : 30 kVA (Customized)
- Frequency : 50Hz/60Hz
- Primary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V…(Customized)
- Secondary voltage (VAC)* : 120V/ 190V/ 208V/ 220V/ 230V/ 240V/ 380V/ 400V/ 440V/ 415V/ 460V/ 480V/690V…(Customized)
- Withstand voltage test : 100% tested. Primary to secondary 2.5kV AC/min; Primary to safety ground 2.5kV AC/min; Secondary to safety ground 2.5kV AC/min. (does not have both puncture and break-down)
- Insulation resistance : >100MΩ / DC500V
- Insulation class : B/H
- Overload capability : 300% for 10 seconds, 150% for 120 seconds
- Efficiency : ≥98%
- Short circuit impedance : 4%
- Total Harmonic Distortion : ≤1%
- Power factor : 0.8
- Primary to secondary winding isolation voltage : 1000V~3000V
- Connection type* : standard Dyn11 and customized Ynyn0, Yd11, Dd0. Dyn5. Dzn0, etc, as per customer requriements.
- Temperature rise limit : 100K (actual temperature minus ambient temperature)
- Enclosure protection grade : standard IP22 indoor ( contact us for customized electrostatic shield or IP54, IP65 outdoor).
- Cooling mode : Natural cooling / fan system cooling
- Material : Transformer coil adopts 200 degree high temperature copper or aluminum wire.
- Winding material* : 100% copper or aluminum (Optional)
- Noise : ≤ 45dB (within 1m)
- Environment temperature : -20℃~+50℃, indoor enclosure, floor-mounted
- Standard : IEC60076-1, VDE0550, IEC439, JB5555, GB5226, etc.
- Certification : CE, RoHS and ISO:9001
- Design Life : 30 years
- Warranty : 1 years
- Silicon Steel Sheet: New cold rolled silicon steel sheet, 0.27mm, 0.30mm, 0.35mm of thickness, excellent performance.
- Terminal Block: High quality terminal block, excellent temperature resistance, pressure resistance and flame retardancy for small power. For high power, made of quality copper material, with good electrical conductivity, high temperature resistance, not easy to burn out the equipment when short circuit happens.
- Enameled Wires: H class enamelled copper/aluminum wires, temperature resistance 200℃, winded tightly and uniformly, no insulating layer, high heat dissipation, service life ≥35 years.
- Bobbin: The bobbin of isolation transformer is made of nylon, high temperature resistance, great flame retardancy. The high power transformer with frameless design has ventilation slots between the coils for smooth air flows which reduce temperature of coils.
- Insulation Process: The 30 kVA isolation transformer adopts H-class vacuum impregnated insulation, temperature resistance of 200°C, lower noise, better insulation and is anti-rust and anti-corrosion.
|Open Type (A*B*C)||Mounting Size (D*E)||Enclosed Type (A*B*C)||Open Type||Enclosed Type|
|Aluminium Wire Transformer||440*350*430mm||300*205mm||420*610*610mm||140kg||165kg|
|Copper Wire Transformer||440*340*420mm||300*195mm||420*610*610mm||160kg||185kg|
Buy Transformer 230v-460v Online
Each modular transformer includes an 8/4 SO cable with black 60˚ C (140˚ F) rated rubber insulation. The dual-voltage transformer is mounted to a plate/bracket, with an optional circuit breaker and high-voltage receptacle attached. The standard receptacle conforms to the CEE-17 design.
Other receptacles may be furnished by special order.
Weight: 63.5 kg (140 lb) Field-Installed kit (with CB2) P/N 76-00670-00 Field-Installed kit (without CB2) P/N 76-00670-0
- Phase – Electrical: Three
- Input Voltage – Transformer: 460V AC Delta
- Output Voltage – Transformer: 133V AC, 230V AC Wye
- Item – Transformer: Buy 30 kva Three Phase Transformer
- VA Rating – Transformer: 7.5 kVA
- Mounting – Transformer: Wall
- Outdoor Rated – Transformer: Yes
- Temp. Rise: 115 Degrees C
- BrandAcme Electric
Country of OriginMexico
- CategoryIsolation Transformers
|Dimensions||7.37 in x 19.25 in x 15.21 in|
|Item||Drive Isolation Transformer|
|Phase – Electrical||Three|
|Input Voltage – Transformer||460V AC Delta|
|Output Voltage – Transformer||133V AC, 230V AC Wye|
|Item – Transformer||Three Phase Drive Isolation Transformer|
|VA Rating – Transformer||7.5 kVA|
|Mounting – Transformer||Wall|
|Outdoor Rated – Transformer||Yes|
|Temp. Rise||115 Degrees C|
|Winding Material – Transformer||Aluminum|
|Hz – Electrical||60 Hz|
|Standards||CSA Certified, UL Listed|
|Voltage Function – Transformer||Step Down|
|Enclosure Rating||NEMA 3R|
|Output Voltage||230VAC Wye/133VAC|
|Enclosure Finish||Powder Polyurethane Paint|